|
SATA II eSATA PCI Device Output Bracket 
|

| Connect your internal SATA host card to external PCI ports giving a clean, safe and sturdy attachement for external Use of SATA II Devices.2x Channel 7-Pin Standard SATA Data Cable Sata internal to eSATA PCI Bracket Adapter 
|
Part Number | Length | Price for 1-19 Pcs. | Price for 20+ Pcs. | Buy Now! | SS-PCI-2XSS | 2 Channel eSATA PCI Cable Bracket | $ 17.41 | $ 12.67 |
| SS-PCI-4XSS | 4 Channel eSATA PCI Cable Bracket | $ 21.51 | $ 17.77 |
| Convert internal SATA ports to External accesible eSATA - Two independent Serial ATA channel fully support RAID function - Capable delivery data up 3Gb (3.0Gbps x 2) - An ideal device to bring SATA internal ports to external accessibility port for SATA External RAID Enclosures |
|
|
|
eSATA Dual Port Device Bracket Serial ATA Bracket SCSI 1 Form Factor |

| A Two Channel Serial ATA pass-through panel mount, this exclusive SATABKT offers an un-precedent options: converting SCSI cases to Serial ATA cases or accessing internal Serial ATA ports. Imagine creating an external hotplug-able 4 bay 10K rpm HDD drives... or 6 bay, or 8 bay, or 12 bay |
Part Number | Length | Price for 1-19 Pcs. | Price for 20+ Pcs. | Buy Now! | SS-Device-2XSS | Dual eSATA SCSI Mount Device Bracket | $ 23.99 | $ 17.67 |
| SS-Device-4XSS | Quad eSATA SCSI Mount Device Bracket | $ 35.11 | $ 24.77 |
| Converting New/Existing SCSI enclosure Installing the Serial ATA bracket into a SCSI type I cut-out on the rear of an enclosure allows you within seconds to convert any new or existing enclosure to a Serial ATA enclosure, and the modified enclosure will fully support SATA 3.0Gb transfer rates and SATA RAID functions with full hotplug-able capability. |
|
|
|
eSATA Dual Port Internal to External Adapter PCI Bracket |

| |
Part Number | Length | Price for 1-19 Pcs. | Price for 20+ Pcs. | Buy Now! | SS-ESPCI5 | 5 Inch Cable eSATA PCI Bracket | $ 9.53 | $ 9.53 |
| SS-ESPCI10 | 10 Inch Cable eSATA PCI Bracket | $ 11.53 | $ 9.53 | | SS-ESPCI15 | 15 Inch Cable eSATA PCI Bracket | $ 12.63 | $ 9.53 |
| Internal SATA signal cable to eSATA extender cable ports with PCI bracket-singal Take your existing SATA ports and route them to the outside of your computer case for use with any eSATA SATA II Hard Drive Enclosures including RAID eSATA Enclosures. Certified eSATA External Port COnnectors mounted on a sturdy Metal PCI form factor Bracket, Available in 3 cable lengths. SATA II PCI Bracket Features: Provides 2 external SATA II connection to SATA device. 13.5 cm in length (5.31 inches) Supports 3.0 GBps Data Transfer Rate. Convert Internal SATA I port to External SATA II connection at PCI bracket Supports (2) Serial ATA device
Specifications: System:
For Host Systems with 2 internal SATA Ports.
Serial ATA Ports:
Compatible with SATA ports on mother boards or add in cards. Compliant with Serial ATA 1.0 and 2.0 Specifications Cable Support:
Supports (2) external SATA Device
NOTE: OS Transparent, depends on the Host Support
The Serial ATA dual port PCI Bracket installs into your PC as you would install any other PCI related card or bracket. However, the cable ends of the PCI bracket need to connect to either the SATA enabled mother board or SATA controller card within your PC. Clicking the image on the left will present a larger view of the SATA II ports and an outline of the connector port.
Because this is a dual port SATA PCI bracket, two available internal SATA port connections must be available to enable both ports on the bracket. Both ports however are independent of each other meaning if there is only one available SATA internal connector to connect to, then only one of the SATA PCI bracket ports would function.
This allows an external SATA device connection to be made from an internal source (the PCI controller card) by connecting the cable end of the single port SATA I or SATA II PCI bracket to the controller cards internal female connection.
| | | | | |
|
|
|
Quad Port eSATA II PCI Port Bracket |

| -
- · Insulation resistance: 1000mW minimum
|
Part Number | Length | Price for 1-19 Pcs. | Price for 20+ Pcs. | Buy Now! | SS-PCI-2XSS | 2 Channel eSATA PCI Cable Bracket | $ 17.41 | $ 12.67 |
| SS-PCI-4XSS | 4 Channel eSATA PCI Cable Bracket | $ 21.51 | $ 17.77 |
| Convert internal SATA ports to External accesible eSATA - Two independent Serial ATA channel fully support RAID function - Capable delivery data up 3Gb (3.0Gbps x 2) - An ideal device to bring SATA internal ports to external accessibility port for SATA External RAID Enclosures |
|
|
|
eSATA Quad Port Device Bracket Serial ATA Bracket SCSI 1 Form Factor |

| - Serial ATA cable assemblies represent the next generation in box storage interfaces
- · Serial ATA is a superior technology to parallel ATA because it uses thinner, more flexible cables and fewer pins in connectors, which improves airflow and allows for easier board routing
Physical properties: · Housing material: thermoplastic · Contact material: copper alloy · Plating-mating area: gold 15microinches minimum · Operating temperature: -25 to +80 degrees Celsius Electrical properties: · Contact current rating: 1.5A per pin minimum · Contact resistance: initially 30mW maximum· Dielectric withstanding voltage: 500VAC for 1 minute at sea level · Insulation resistance: 1000mW minimum |
Part Number | Length | Price for 1-19 Pcs. | Price for 20+ Pcs. | Buy Now! | SS-Device-2XSS | Dual eSATA SCSI Mount Device Bracket | $ 23.99 | $ 17.67 |
| SS-Device-4XSS | Quad eSATA SCSI Mount Device Bracket | $ 35.11 | $ 24.77 |
| Converting New/Existing SCSI enclosure Installing the Serial ATA bracket into a SCSI type I cut-out on the rear of an enclosure allows you within seconds to convert any new or existing enclosure to a Serial ATA enclosure, and the modified enclosure will fully support SATA 1.5Gb transfer rates and SATA RAID functions with full hotplug-able capability. |
|
|
|
|
|
|
External SATA 1 Port PCI Bracket Cable 30cm |

| This bracket will fit in any standard expansion slot. It basically allows you to connect an external SATA hard drive to your computer. The external port connects to the disk enclosure, and the internal SATA port can be attached to any SATA controller or SATA ready motherboard installed on your PC. Convert Internal SATA 1port to External connection at PCI bracket |
Part Number | Length | Price for 1-19 Pcs. | Price for 20+ Pcs. | Buy Now! | SS-PCI-SS12 | Single Port Type “L” 12 Inch Signal Cable with PCI Bracket | $ 4.99 | $ 4.47 |
| Materials & Electrical Characteristic : from 10MHz ~ 4500MHz - Cable :
(26AWG/1P+A)*2+4D, AWM style 2725 80 degree 30V VW-1 Conductor: 26AWG solid tinned copper Isolator: FOAM PE or FOAM PP Wrapping: Hot melt aluminum mylar spirally wrapped Drain Wire: 28AWG solid tinned Copper Jacket: 80C PVC OD 2.2mm*7.80mm+/-0.2 - Connector:
Housing: Temperature polyster & Glass fiber, UL 94V-0 Terminal: Copper alloy Cover: ABS, UL 94V-0 Plating: 15 u" gold plated over 50u" nickel - High Frequency Character :
Impedance: 100+/-15 ohms (Mated connector) Attenuation: 6 dB Max from 10MHz ~ 4500MHz Crosstalk (NEXT): -26dB Max from 10MHz ~ 4500MHz Intra pair skew: 10 pcs Max Rise Time: 85 ps Max
|
|
|
|
External SATA 2 Port PCI Bracket Cable 30cm |

| External SATA 2-Port PCI Bracket Cable 30cm This bracket will fit in any standard expansion slot. It basically allows you to connect an external SATA hard drive to your computer. The external port connects to the disk enclosure, and the internal SATA port can be attached to any SATA controller or SATA ready motherboard installed on your PC.
|
Part Number | Length | Price for 1-19 Pcs. | Price for 20+ Pcs. | Buy Now! | SS-PCI-SS212 | Dual Port Type “L” 12 Inch Signal Cable with PCI Bracket | $ 8.59 | $6 .97 |
| For Use with Standard Sata External Cables Type “L” and External Devices that Use Type “L” Shielded Ports as shown Below. 

PCI Bracket Can also be used to Route Internal SATA Port to External Devices As shown below. 
|
|
|
|
MORE SATA CABLES External Sata and eSATA Cables (click here) MultiLane Infiniband External Cables (click Here) |