USB2.0 to SATA Bridge Adapter / Converter Cable for Sata Hard Drives
USB 2.0 SATA Hard Drive Adapter Cable
Great addition to anyone who needs to Test SATA or SATA II Hard drives or if you allready have a SATA enclosure and you need to convert SATA Output to USB
USB 2.0 Adapter to any Native SATA 3.5'' Drive from 80GB up to 500GB. Compatible with Windows ME/2000/XP/2003.
Adapter plugs directly to your usb 2.0 port on a windows based computer and provides one SATA port (with short cable) to connect directly into your SATA 3.5'' HDD. Uses NEC and Jmicron Chip for COnversion. Real Life Test Results show a 12.9 GB file folder with 237 Files transfered in less than 10 minutes. Tested with WD/Maxtor/Seagate/Hitachi SATA drives.
Package includes Adapter cable only, you will need to provide external power to your drive.
USB2.0 to serial ATA translation. It includes the NEC USB2.0 IDE bridge & Serial ATA PHY, Link, Transport. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 ,The AUS100 converter supports a SATA 1.5GHz data rate & USB2.0 480MHz data rate . The application layer supports both the ATA register command set and PACKET command set, which could drive SATA Hard Disk.
Dimension : 51 * 30 * 17 (mm)
Weight : 19g
With LED Indicated power
Power supply : USB port
need power : under 1W
Support Win-98se,Win-98me need driver
Support Win-2000,Win-xp free driver
Easy install & free driver
Max speed (Read + Write) : 52M Byte
USB2.0 Specification compliant USB2.0 NEC newest chipset install
Serial ATA 1.0 Specification compliant
Automatic Serial ATA 1.5 Gbps speed negotiation
Support USB2.0 plug & play
Support Serial ATA hot-plug
Ultra low power consumption Work for both AC and DC couple between the transmitter and the receiver
Provide specified OOB signal detection and transmission Support Spread Spectrum Clocking to reduce EMI
Support Partial/Slumber power management Provide adjustable TX signal amplitude and pre-emphasis level
SATA Hard Drive Adapter to USB 2.0 Cable
SATA Disk Slave support Speed :Win-98 .....Read >17 Mbyte , Write >14 Mbyte
Speed :Win-2000,xp .Read >27 Mbyte , Write >25 Mbyte
Item Can be used with ANY SATA Enclosure to get acess to Hard Drive Data Via USB 2.0 Port